USE OF A SUPPRESSOR WITH THE PMR-30 PISTOL IS NOT RECOMMENDED.
Due to the unique locking action of the PMR-30 pistol and the lightweight slide and barrel, the use of a suppressor is not recommended as it will cause an increase in gas volume and pressure, and the slide will likely unlock early. This will cause an increase in gases and residue that is ejected back towards the shooter’s face and could also cause a case rupture to occur. Any damage or injuries caused by the use of a suppressor or other heavy-weight muzzle device attached to the PMR-30 pistol will not be covered by any Warranty.
We recommend using our PMR30 Muzzle Brake with CCI Maxi-Mag 22 WMR 40-grain ammo. Lower power ammo and/or lightweight bullets may cause failure to feed problems due to a lack of energy to cycle the slide all the way back. Please use eye protection when shooting the KelTec PMR30™. We also recommend NOT loading more than 15 rounds in the 30-round magazine to avoid failure to feeds.
The PMR30 threaded barrels and muzzle brakes are threaded 3/8×28 instead of the typical 1/2×28. This is partially due to the thickness of the barrel and to prevent people from suppressing the PMR30.
Nitrided finish for aluminum is evenly applied and gives our muzzle brakes an attractive, traditional gun finish. The nitride will provide years of hard-wearing protection.
F.J. Feddersen’s KT-PMR30-BRAKE is compatible with KelTec PMR30™ Gen 1 & 2 pistols with threaded barrels (3/8×28) and FJF’s own KelTec PMR30™ Threaded Pistol Barrel – Gen 1 and KelTec PMR30™ Threaded Pistol Barrel – Gen 2.
FJF 30-Day Money-Back Guarantee
F.J. Feddersen provides 100% satisfaction guaranteed. If you are unhappy with our Muzzle Brake after shooting it, you can send it back for a full refund excluding delivery costs. See our return policy for details.