KelTec PMR30™ Threaded Pistol Barrel – Gen 2 – 22 Magnum – Blued Steel

$120.00

Adding an FJ Feddersen PMR30™ threaded barrel with advanced SEP rifling and tight tolerances improves the original design. It is like getting an instant upgrade that improves the accuracy of your shooting. The KT-PMR30-2 THREADED is the threaded version of the barrel for Gen 2 guns. It comes in a beautiful and durable blued finish and includes a matching thread protector.  USE OF A SUPPRESSOR WITH THE PMR-30 PISTOL IS NOT RECOMMENDED, ONLY FLASH REDUCERS AND MUZZLE BRAKES.

SKU: KT-PMR30-2-THREADED Category: Tag:

In 2008, KelTec’s Design Engineer, Tobias Obermeit had the vision to build a semi-auto .22 Magnum pistol that holds 30 rounds in a flush-fit magazine. The PMR30™ was based on an early, futuristic-looking design by George Kellgren. The KelTec PMR30™ was released in 2010 with high praise and stands out as one of the most innovative and unique handguns in the world today.

How to Tell Whether Your KelTec PMR30™ is a Gen 1 or Gen 2 
There are minor differences between a Gen 1 and Gen 2 PMR30™ and the barrels should not be interchanged. The easiest way to confirm your PMR30’s generation is to inspect your serial number. Do this before ordering.

  1. GEN 1 – The serial number starts with 1 letter (A-Z) and is followed by a numeral (0-9).
  2. GEN 2 – The serial number starts with 2 letters (A-Z)

Blued Finish
Our KelTec PMR30™ Gen 2 threaded pistol barrels look as good as they shoot. Our blued finish for chrome moly vanadium steel is evenly applied with blackening technologies that give our blued barrels an attractive, traditional barrel finish. The coating will provide years of hard-wearing protection and corrosion resistance to your pistol barrel.

Threaded Barrel
USE OF A SUPPRESSOR WITH THE PMR-30 PISTOL IS NOT RECOMMENDED, ONLY FLASH REDUCERS AND MUZZLE BRAKES. Due to the unique locking action of the PMR-30 pistol and the lightweight slide and barrel the use of a suppressor is not recommended as it will cause an increase in gas volume and pressure and the slide will likely unlock early. This will cause an increase in gases and residue that is ejected back towards the shooters face and could also cause a case rupture to occur. Any damage or injuries caused by the use of a suppressor or other heavy weight muzzle device attached to the PMR-30 pistol will not be covered by any Warranty. The thread pattern on the PMR-30 threaded barrel is 3/8 x 24.

Compatibility
F.J. Feddersen’s KT-PMR30™ Gen 2 threaded barrel is drop-in compatible with KelTec PMR30™ Gen 2 pistols.

FJF 30-Day Money-Back Guarantee
F.J. Feddersen provides 100% satisfaction guaranteed. If you are unhappy with our pistol barrel after shooting it, you can send it back for a full refund excluding delivery costs. See our return policy for details.

Additional information

Caliber

Barrel Length

Finish

Threading

Model

Metal

Availability

Compatibility

Thread Protector